Roof suitability for solar panels on a New Zealand residential home

Installing solar panels is a practical way to reduce electricity costs and make better use of renewable energy. However, before investing in a solar system, you need to consider one important question: is your roof suitable for solar panels?

Many New Zealand homeowners focus on panel prices, energy savings and installation costs without checking the condition of their existing roof. This can create problems later, especially if the roof needs repairs or replacement after the panels have been installed.

Understanding roof suitability for solar panels before installation can help you avoid unnecessary expenses, prevent roofing damage and get better long-term value from your investment.

Whether you own a home in Wellington, Palmerston North or elsewhere in New Zealand, here are seven essential checks to help determine whether your roof is ready for solar panels.


Before installing solar panels, you need to make sure your roof can safely support the system.

Solar panels, mounting brackets and supporting equipment add extra weight to your existing roof. Installers also need to attach mounting systems securely without compromising the roof’s waterproofing.

If your roof has existing damage, structural weaknesses or deteriorating roofing materials, installing solar panels without addressing these issues can lead to expensive repairs.

Good roof suitability for solar panels also involves more than structural strength. Roof age, material, direction, pitch, available space and surrounding shade all influence how well your solar system performs.

The Energy Efficiency and Conservation Authority (EECA) provides useful guidance on planning a home solar system, including the roof features homeowners should consider before installation.

Let’s look at the seven checks that matter most.


Start with the basics: Your roof should be in good condition before you install solar panels.

Roofing materials naturally deteriorate over time due to exposure to sunlight, rain, strong winds and changing weather conditions. In parts of New Zealand, particularly Wellington, frequent rainfall and high winds can accelerate roofing problems.

An ageing roof may already have loose fixings, corrosion, damaged sheets or deteriorating flashing. Installing solar panels over these problems can make future maintenance more difficult.

Before proceeding, check for:

  • Rust or corrosion on metal roofing.
  • Cracked, loose or damaged roofing materials.
  • Water stains on ceilings or signs of roof leaks.
  • Loose screws, fixings or roofing sheets.
  • Deteriorated flashing around roof junctions.
  • Previous repairs that may need further attention.

Solar panels can remain on a roof for many years. If your roof needs replacement within the next few years, you may have to pay to remove and reinstall the panels during roofing work.

According to EECA, a new or recently rejuvenated roof is ideal for solar installation. A roof that will not need major maintenance or replacement within the next 10 years is generally a better candidate.

If your roof is showing signs of deterioration, consider arranging professional roof repairs or discussing whether a complete re-roof is a better long-term option.


Look beyond the roofing sheets: Your roof structure must safely support the additional loads from the solar panel system.

Solar panels are not the only components adding weight. Mounting frames, brackets, wiring and other equipment also contribute to the overall load.

Your roof structure needs to handle these additional loads while continuing to withstand normal environmental conditions, including wind, rain and, where relevant, snow.

A structural assessment may need to examine:

  • Roof rafters and supporting beams.
  • Roof trusses and structural connections.
  • Existing timber deterioration or damage.
  • The condition of supporting members.
  • The proposed solar mounting and fixing points.
  • Wind loads and other relevant structural forces.

Older homes may have different roof designs and structural capacities compared with modern buildings. This does not automatically mean they cannot support solar panels, but a professional assessment may be necessary.

A qualified structural engineer can determine whether the roof structure can safely support the proposed solar installation and whether additional support or structural improvements are required.

Good roof suitability for solar panels depends on the complete roof structure, not simply whether the visible roofing material looks strong.


In New Zealand, north-facing roof sections generally receive the most sunlight throughout the day. This makes them a preferred location for residential solar panels.

However, east-facing and west-facing roof sections can also work well, depending on your household’s electricity usage and the solar system design.

Here is a general guide:

Roof DirectionSolar Suitability
North-facingGenerally ideal
North-east-facingVery good
North-west-facingVery good
East-facingGood
West-facingGood
South-facingGenerally less favourable

Not necessarily. Modern solar systems can still generate electricity from less favourable roof orientations. However, your installer may need to consider panel placement, system size and expected energy production.

The Electricity Authority’s solar power guidance explains how roof direction, sunlight and local conditions influence solar performance.

When assessing roof suitability for solar panels, consider all available roof sections rather than focusing on just one side of the house.


A roof with a suitable angle can help panels capture sunlight efficiently. According to EECA, a roof pitch between 30 and 45 degrees is ideal, while pitches between 15 and 30 degrees can also provide good results.

Flat roofs and very steep roofs may need additional mounting considerations.

Available roof space is equally important.

A typical small-to-medium residential solar system may require space for around 7 to 12 panels. Individual panels commonly occupy approximately 1.6 to 2 square metres.

When checking your available roof space, consider:

  • The number of panels your household needs.
  • Roof sections that receive adequate sunlight.
  • Space around chimneys and skylights.
  • Roof edges and gutters.
  • Areas that installers need to access for maintenance.
  • Existing roof features that may restrict panel placement.

A roof may have plenty of total surface area but still offer limited usable space because of chimneys, skylights, roof valleys and other obstructions.

Understanding these limitations early helps your solar installer design a system that fits your property.

Proper roof suitability for solar panels involves finding enough usable space without compromising roof access, drainage or maintenance.


A roof may face the right direction and have a suitable pitch, but nearby obstructions can still affect electricity generation.

Common sources of shade include:

  • Large trees near the house.
  • Tall neighbouring buildings.
  • Chimneys and roof structures.
  • Nearby hills or elevated land.
  • Other objects that cast shadows during the day.

What should homeowners do?

Observe how sunlight moves across your roof during different parts of the day. Remember that the sun’s position also changes between summer and winter.

If trees create excessive shade, you may need to discuss alternative panel positions or suitable system configurations with your solar installer.

Modern solar technology can help manage some shading issues, but the final system design should reflect the actual conditions at your property.

When considering roof suitability for solar panels, remember that good sunlight exposure helps improve the value of your solar investment.


New Zealand homes commonly have long-run metal roofing, concrete tiles, pressed metal tiles and other roofing materials.

Each material requires suitable mounting equipment and installation techniques.

For example:

Metal roofs can accommodate solar mounting systems designed for the specific roofing profile. Installers must use suitable fixings and manage penetrations carefully to maintain weather resistance.

Tile roofs require suitable mounting brackets and careful handling. Installers must avoid cracking tiles or creating gaps that allow water to enter.

These roofs need compatible mounting systems that suit their profile and construction. Installers should follow the roofing and mounting system manufacturer’s requirements.

If your roof has corrosion, cracks, loose sheets or deteriorated sections, address these issues before installation.

Incorrect installation around mounting points can create entry points for rainwater. Over time, water penetration may damage insulation, roof framing and internal ceilings.

New Zealand’s Building Code Clause E2, External Moisture, addresses the need to protect buildings against water entering or accumulating within the building envelope.

You can read the MBIE Building Performance guidance on external moisture.

A suitable roof installation must protect both the solar equipment and the building underneath it.


Many homeowners overlook this point when assessing roof suitability for solar panels. Solar systems can remain in place for decades, while roofing materials may need maintenance or replacement during that period.

If you need to replace damaged roofing sheets, repair flashing or address leaks, working around installed solar panels can make the process more complicated.

Before installation, consider:

  • Whether your roof will need replacement within the next 10 years.
  • Whether any roof repairs are currently outstanding.
  • Whether gutters and drainage systems are working properly.
  • Whether installers can access the roof safely.
  • Whether future roof inspections and cleaning will remain practical.
  • Whether solar panels will obstruct access to important roofing areas.

If your roof is nearing the end of its useful life, replacing it before solar installation may be a more practical decision.

This allows roofing work and solar installation to be planned together, reducing the likelihood of removing and reinstalling panels later.

Hine Roofing provides professional new roofing and re-roofing solutions for homeowners who need to improve or replace their existing roof.

Planning ahead can make a significant difference to the long-term cost and performance of your solar investment.


Under the updated rules, a roof-mounted solar panel array of no more than 40 square metres can generally be installed without a building consent when it meets the applicable wind-zone and other exemption conditions.

For larger arrays exceeding 40 square metres, or installations where design wind speeds exceed 44 metres per second, the structural fixings must be designed or reviewed by a Chartered Professional Engineer to qualify for the relevant consent exemption.

There are also specific requirements covering mounting structures, structural fixings and installation conditions.

Importantly, a building consent exemption does not mean you can ignore building regulations. All work must still comply with the New Zealand Building Code and applicable exemption conditions. Local District Plan requirements may also apply.

The official MBIE Building Performance guidance on roof-mounted solar arrays explains the conditions for installations below 40 square metres.

You can also review the guidance for larger roof-mounted solar arrays.

Always confirm the applicable requirements with your solar installer, structural engineer and local council before proceeding.


Here is a simple guide to help you understand the difference.

Existing Roof ConditionRecommended Approach
Roof is relatively new and in good conditionConsider solar installation after assessment
Minor leaks or isolated damageArrange professional roof repairs
Loose roofing sheets or damaged flashingRepair before installation
Widespread corrosionConsider a full roof assessment
Roof nearing the end of its lifespanDiscuss re-roofing before solar installation
Structural concernsArrange a structural engineer’s assessment

If you are unsure whether your roof needs a minor repair or more extensive work, read our guide on roof patching vs roof repair.

The important thing is to resolve existing roofing problems before installing solar panels.


A reliable roof is the foundation of a successful solar installation.

Before spending money on solar panels, make sure your existing roof is in a suitable condition. Hine Roofing helps homeowners across Wellington and Palmerston North maintain, repair and replace their roofing systems.

With 20 years of industry experience, Hine Roofing provides:

  • Professional roof repairs to address existing roofing problems.
  • New roofing solutions for residential properties.
  • Complete re-roofing services.
  • Commercial roofing solutions.
  • Quality workmanship backed by a 10-year workmanship warranty.
  • Free, no-obligation roofing quotes.

Whether your roof needs a minor repair or a complete replacement, addressing roofing issues before solar installation can help protect your property for years to come.

Visit Hine Roofing to learn more about our roofing services.


Start by checking the roof’s age, condition, structural strength, direction, pitch and available space. You should also consider shading and the type of roofing material. A solar installer and, where necessary, a structural engineer can assess whether your roof is suitable.

Yes, provided the roof is in suitable condition and can safely support the proposed system. However, if your roof has corrosion, leaks or structural damage, you should address these issues before installation.

Correctly designed and installed solar mounting systems should not damage your roof. However, poor fixing methods, unsuitable brackets or incorrect waterproofing can create leaks and other roofing problems.

North-facing roofs generally provide the best solar exposure in New Zealand. North-east and north-west orientations are also good options. East- and west-facing roofs can work well, while south-facing roofs may produce less electricity.

A small-to-medium residential system may need space for approximately 7 to 12 panels. Each panel generally occupies around 1.6 to 2 square metres, although the actual space requirement depends on panel size and system design.

If your roof is nearing the end of its useful life or requires significant repairs, replacement before solar installation may save money in the long run. This avoids potentially removing and reinstalling solar panels during future roofing work.

Many roof-mounted solar installations qualify for building consent exemptions under the rules introduced in October 2025. However, the exemption depends on array size, design wind speed and other conditions. The installation must still comply with the Building Code.


Solar panels can be a valuable addition to your home, but your roof needs to be ready before installation begins.

Checking your roof’s condition, structural strength, roofing material and remaining lifespan can help prevent unexpected costs and protect your property.

If you are planning solar installation and have concerns about your existing roof, speak with a roofing professional before making the investment.

Contact Hine Roofing today for a free, no-obligation quote. Our experienced team can help you assess your roofing needs and find the right solution for your property.

Protect your roof today and make your solar investment count for years to come.

15% Off New Quotes

Contact us today for an obligation-free quote

Wellington’s #1 roofing experts – commercial & residential.